| 1. | The mobile no . 7 signaling network of 2 mbit s high speed signaling link
高速信令链路架构移动通信七号信令网 |
| 2. | Signaling link manager slm
信令链路管理程序 |
| 3. | Active signaling link
激活信令链路 |
| 4. | Test specification for no . 7 signalling system - the ambit s high speed signalling link
No . 7信令系统测试规范- 2mbit s高速信令链路 |
| 5. | This layer defines the physical , electrical , and functional characteristics of the signaling links connecting ss7 components
这一层定义了连接ss7组件的信令链路的物理的、电气的和功能性特征。 |
| 6. | The pre - determined path , consisting of a succession of signalling points / signalling transfer points and the interconnecting signalling links , that a message takes through the signalling network between the origination point and the destination point is the signalling route for that signalling relation
信令路由是从源信令点到达目的信令点所要经过的预先确定的信令消息传送路径，包含一系列信令点/信令转接点及他们之间的互联信令链路。 |
| 7. | At present , we can track the signaling links in the 155 mbs ports of a switch only by using the signaling of the switch itself rather than the external analyzer of the ccs 7 . this causes inconvenience to maintenance . it is expected that manufacturers will enhance the tracking and monitoring functionality of their products and training switching and maintenance personnel concerning routine maintenance of the 155 mbs port
目前，我们只能利用交换机本身的信令观察手段对交换机155mbits端口中的信令链路进行跟踪、分析，而不能通过外挂七号信令分析仪对信令进行监测，给维护工作带来了不便，有待于生产交换机的厂家加强这方面的功能。 |
| 8. | Due to a & b double flats setting of stp ( signalling transfer point ) in different place , and working on mode of payload - sharing on signalling links ( couple links ) between sp ( signalling point ) and stp , the calling signalling sequence cannot be collected completely from single stp . thus it is difficult to synthesize signalling affair in the signalling supervision system . the first , this thesis illuminateds network architecture of no . 7 signalling network and no . 7 signalling centralized supervision system
由于七号信令网的信令转接点设备stp ( signallingtransferpoint )采用a 、 b双平面异地设置，下一级的信令点设备sp ( signallingpoint )至上一级的一对stp之间的信令路由采用负荷分担方式工作， sp至stp对的负荷分担链路形成耦合链路，导致在一个stp处无法采集到完整的呼叫信令序列，这样就给监测系统核心部分之一的信令事件合成带来了极大的难度。 |
